CRN Registration · Manitoba
Manitoba CRN registration.
Pressure vessel, fitting and piping designs used in Manitoba are registered with Inspection and Technical Services Manitoba (ITS). We prepare the package, have it reviewed and stamped by a Canadian P.Eng., and submit it.
At a glance
CRN registration in Manitoba
| Province code in a CRN | 4 |
|---|---|
| Registers designs | Inspection and Technical Services Manitoba (ITS) |
| Legislation |
|
| How to submit | Design registrations are submitted by email; paper submissions have not been accepted since January 1, 2021. |
| Licenses engineers (P.Eng.) | Engineers Geoscientists Manitoba |
- A CRN issued by another Canadian jurisdiction is accepted without a second design review; the design is still registered in Manitoba.
- Submissions are made electronically by email.
- A Manufacturer’s Data Report must be filed with Manitoba before boilers or pressure vessels enter the province.
Reading the number
Where Manitoba appears in a CRN
Every province and territory has its own code. Manitoba’s is 4.
- B7890.4
- First registered in Manitoba
- B7890.54
- First registered in Ontario, then in Manitoba
FAQ
Manitoba CRN questions
Vessel, fitting and piping registration, the documents each one needs, and how a CRN is read are covered in the full CRN guide, and engineer sign-off in Canadian P.Eng. services.
CRN registration in other provinces
Pressure equipment designs used in Manitoba are registered with Inspection and Technical Services Manitoba (ITS).
Manitoba’s code is 4. It appears after the decimal point of a CRN once the design is registered in Manitoba: first if Manitoba registered it first, later in the order the provinces signed off.
Yes. A design must be registered in each province or territory where the equipment is used. A CRN issued in any Canadian jurisdiction is accepted for use in Manitoba without a second design review, but the design must still be registered in Manitoba. Once Manitoba registers it, the code 4 is added to the CRN.
Yes. We prepare CRN applications for manufacturers in the USA, India and worldwide, with Canadian P.Eng. review and stamp, and submit them to ITS.